Search for:

 



Click to enlargeSONY UWPV2, Handheld Mic TX and Portable RX Wireless System



New Page 1



UWPV2/3032 Handheld Mic TX and Portable RX Wireless System

UWP Series UHF synthesized wireless microphone system. Package includes a handheld microphone and portable diversity tuner. Channels 30 to 33. The UWP-V2 includes extremely robust metal construction, a newly designed hand held transmitter, plus the receiver includes a convenient auto channel scanning function allowing automatic search for unoccupied channels. UWP Series transmitters and receivers can also be purchased separately.

Highlights:

Consists of handheld microphone and portable tuner

Suitable for news gathering and for use in PA systems

The handheld microphone is supplied with a microphone holder and screw adaptor

The tuner is supplied with a shoe-mount adaptor (for camcorder mounting), belt clip and two cables (3-pole mini-plug /XLR and 3-pole-mini/stereo mini-plug)

Features:

Features Benefits:
PLL Synthesized System Achieves stable transmission and reception by using a UHF PLL (Phase Locked Loop) frequency synthesized system, which provides accurate carrier signal frequencies. This system is used in both the transmitters and tuners, so that a stable carrier is generated at the transmitter, and accurately tuned in at the tuner. This PLL-controlled system provides highly stable, user-selectable frequencies in increments of 125 kHz.
Space Diversity Reception System Typically, wireless microphone transmission systems can be subject to reception interruptions (signal dropout), but UWP series tuners reduce this to a minimum. By utilizing a space-diversity reception system, it achieves stable reception by using dual-antenna inputs/reception circuits. These receive signals over two different paths and automatically select the stronger RF signal for output.
Tone Squelch Circuitry To avoid picking up carrier signals transmitted from other systems, the transmitter transmits a 32 kHz pilot-tone signal along with the audio signal. The tuner's squelch circuit recognizes this tone signal, and outputs the audio signal only when this tone signal is received. This function prevents the output of unwanted signals and noise from other signal transmissions in the air, as well as the RF noise and popping noise that occur when the transmitter is powered on or off.
Simultaneous Multi-Channel Operation Simultaneous operation of up to 16 wireless microphones. Optimum combinations of practically tested, interference-free frequencies are stored in the tuner. By using the pre-programmed frequency groups, users can easily choose interference-free frequencies for the transmitters and tuners, simplifying the task of system setup.

Specifications:

Handheld Microphone Specifications Detail:
Antenna 1/4 wave length wire (internal)
Audio Attenuator Adjustment Range 0 to 21 dB (in 3 dB steps)
Battery Life Approx. 8 hours with Sony AA-size alkaline (LR6) batteries at 25° C (77°F)
Carrier Frequencies 566 MHz to 590 MHz (TV channels 30 to 33)
Dimensions (Capsule Diameter x Length) 1 15/16 x 10 inches
Frequency Response 50 Hz to 18 kHz (typical)
Indicators (LCD, LED) LCD: Channel number/freq, attenuator, RF output, audio-input, battery, operating time LED: AF/Peak
Max. Input Sound Pressure Level 151 dB SPL (at 21 dB attenuator level)
Microphone Capsule Dynamic capsule (uni-directional)
Oscillator Crystal-controlled PLL synthesizer
Pilot Tone Signal 32kHz
Power Requirements DC 3.0 V (two AA-size alkaline (LR6) batteries)
RF Power Output 30 mW or 5 mW (selectable)
Signal-To-Noise Ratio 60 dB or more (±5 kHz deviation at 1 kHz modulation, A-weighted)
Type of Emission F3E
Weight Approx. 11 oz including batteries
Portable Tuner Specifications Detail:
Antenna 1/4 wave length wire
Audio Output Level -58 dBm
Dimensions (W x H x D) 2-1/2 x 4 1/8 x 7/8 inches
Frequency Response 40 Hz to 18 kHz
Indicators (LCD, LED) LCD: Channel number/freq, attenuator, RF input, audio-input, battery, operating time LED: AF/Peak
Monitor Output Level 5 mW (at 16 ohm)
Oscillator Crystal-controlled PLL synthesizer
Pilot Tone Signal 32 kHz
Power Requirements DC 3.0 V (two AA-size alkaline (LR6) batteries)
RF Squelch Level 15 dBµ
Receiving Frequencies 566 MHz to 590 MHz (TV channels 30 to 33) Users may choose from 188 frequencies on each model
Reference Deviation ±5 kHz (at 1kHz modulation)
Signal-To-Noise Ratio 60 dB or more (± 5kHz deviation at 1 kHz modulation, A-weighted)
Type of Reception Space diversity
Weight Approx. 7.2 oz including batteries

UWPV2/4244 Handheld Mic TX and Portable RX Wireless System

UWP Series UHF synthesized wireless microphone system. Package includes a handheld microphone and portable diversity tuner. Channels 42 to 45. The UWP-V2 includes extremely robust metal construction, a newly designed hand held transmitter, plus the receiver includes a convenient auto channel scanning function allowing automatic search for unoccupied channels.

Highlights:

Consists of handheld microphone and portable tuner

Suitable for news gathering and for use in PA systems

The handheld microphone is supplied with a microphone holder and screw adaptor

The tuner is supplied with a shoe-mount adaptor (for camcorder mounting), belt clip and two cables (3-pole mini-plug /XLR and 3-pole-mini/stereo mini-plug)

Features:

Features Benefits:
PLL Synthesized System Achieves stable transmission and reception by using a UHF PLL (Phase Locked Loop) frequency synthesized system, which provides accurate carrier signal frequencies. This system is used in both the transmitters and tuners, so that a stable carrier is generated at the transmitter, and accurately tuned in at the tuner. This PLL-controlled system provides highly stable, user-selectable frequencies in increments of 125 kHz.
Space Diversity Reception System Typically, wireless microphone transmission systems can be subject to reception interruptions (signal dropout), but UWP series tuners reduce this to a minimum. By utilizing a space-diversity reception system, it achieves stable reception by using dual-antenna inputs/reception circuits. These receive signals over two different paths and automatically select the stronger RF signal for output.
Tone Squelch Circuitry To avoid picking up carrier signals transmitted from other systems, the transmitter transmits a 32 kHz pilot-tone signal along with the audio signal. The tuner's squelch circuit recognizes this tone signal, and outputs the audio signal only when this tone signal is received. This function prevents the output of unwanted signals and noise from other signal transmissions in the air, as well as the RF noise and popping noise that occur when the transmitter is powered on or off.
Simultaneous Multi-Channel Operation Simultaneous operation of up to 16 wireless microphones. Optimum combinations of practically tested, interference-free frequencies are stored in the tuner. By using the pre-programmed frequency groups, users can easily choose interference-free frequencies for the transmitters and tuners, simplifying the task of system setup.

Specifications:

Handheld Microphone Specifications Detail:
Antenna 1/4 wave length wire (internal)
Audio Attenuator Adjustment Range 0 to 21 dB (in 3 dB steps)
Battery Life Approx. 8 hours with Sony AA-size alkaline (LR6) batteries at 25° C (77°F)
Carrier Frequencies 638 MHz to 662 MHz (TV channels 42 to 45)
Dimensions (Capsule Diameter x Length) 1 15/16 x 10 inches
Frequency Response 50 Hz to 18 kHz (typical)
Indicators (LCD, LED) Channel number/freq, attenuator, RF output, audio-input, battery, operating time, AF/Peak
Max. Input Sound Pressure Level 151 dB SPL (at 21 dB attenuator level)
Microphone Capsule Dynamic capsule (uni-directional)
Oscillator Crystal-controlled PLL synthesizer
Pilot Tone Signal 32kHz
Power Requirements DC 3.0 V (two AA-size alkaline (LR6) batteries)
RF Power Output 30 mW or 5 mW (selectable)
Signal-To-Noise Ratio 60 dB or more (±5 kHz deviation at 1 kHz modulation, A-weighted)
Type of Emission F3E
Weight Approx. 11 oz including batteries
Portable Tuner Specifications Detail:
Antenna 1/4 wave length wire
Audio Output Level -58 dBm
Dimensions (W x H x D) Excluding Antenna 2-1/2 x 4 1/8 x 7/8 inches
Frequency Response 40 Hz to 18 kHz
Indicators (LCD, LED) Channel number/freq, attenuator, RF input, audio-input, battery, operating time, AF/Peak
Monitor Output Connector 3 -pole mini jack (x1), unbalanced
Monitor Output Level 5 mW (at 16 ohm)
Oscillator Crystal-controlled PLL synthesizer
Pilot Tone Signal 32kHz
Power Requirements DC 3.0 V (two AA-size alkaline (LR6) batteries)
RF Squelch Level 15 dBµ
Receiving Frequencies 638 MHz to 662 MHz (TV channels 42 to 45) Users may choose from 188 frequencies on each model
Reference Deviation ±5 kHz (at 1kHz modulation)
Signal-To-Noise Ratio 60 dB or more (± 5kHz deviation at 1 kHz modulation, A-weighted)
Type of Reception Space diversity
Weight Approx. 7.2 oz including batteries

 








SONY UWPV2$465.00