 |  | 
 
 Cost-effective HD Productions - The HVR-M10U HDV 1080i VTR
Developed using the HDV 1080i specification of the HDVTM format,
the HVR-M10U Digital HD Videocassette Recorder provides HDV 1080i
recording and playback capabilities for a variety of roles such as a simple
playback viewer and a feeder for nonlinear editing systems.
It enables operators to record and play back 1080i HD signals, while
maintaining the DVCAMTM/DV recording and playback capabilities provided
on current Sony DVCAM models. What's more, the HVR-M10U also offers a
down-conversion capability for its 1080i recordings. These features
enable the HVR-M10U to be active immediately in current SD systems,
while also providing a step-by-step migration to the HD world – operators
can continue to upload materials in DVCAM or DV, and switch to HDV when
the need arises, or upload in HDV 1080i using the down-conversion capability
as required. In addition to basic VTR features inherited from the DSR-11,
the HVR-M10U also provides easy monitoring capabilities, with a built-in,
3.5-inch viewable area, measured diagonally, LCD monitor to display important
information, such as the recorded image, audio level, and set-up menu.
The HVR-M10U provides a highly powerful, yet cost-effective tool for
nonlinear editing system today with a path to tomorrow.
HDV 1080i Specification
The HDV 1080i specification of the HDV format features 1080 effective
scanning lines (interlace scanning system) and 1,440 horizontal pixels.
It adopts the MPEG-2 compression format (MP@H-14 for video), which uses
8-bit digital component recording with a sampling rate of 4:2:0. MPEG-1
Audio Layer II is used as the audio compression format, allowing for
two-channel recording with a sampling frequency of 48 kHz/16-bit.
The HDV 1080i specification provides high picture quality that can be used
for HDTV program production. Note: The HDV format also defines the HDV 720p
specification, which features 720 effective scanning lines (progressive
scanning system) and 1,280 horizontal pixels.
Compatible with Existing and New DV Videocassette Tape
To realize the full potential of HDV, DVCAM and DV formats, professionals
choose Sony DigitalMaster tape. While the HDV format can accept
conventional DV tape, only DigitalMaster tape has a dual layer of magnetic
material. The result? Higher RF output, lower noise, 95% fewer errors and
60% fewer dropouts compared to DV tape! Exactly the performance that
professionals require.
Switchable Recording and Playback – HDV 1080i/DVCAM/DV2 and 60i/50i
The HVR-M10U can switch between HDV 1080i, DVCAM and
DV recording, providing full flexibility to record in either
standard or high definition depending on production needs.
In addition, it can be switched between 60i and 50i modes
(NTSC and PAL), allowing for flexible productions without
the need for two separate VTRs with each standard.
2 The HVR-M10U supports DV SP mode only.
Down-conversion Playback Capabilities
The HVR-M10U can convert material from 1080i down to
480i and 576i, and output these video signals through its
i.LINK® interface. In addition, these signals can also be output
via either analog component, composite, or S-video connectors.
This allows editing of recorded material with a nonlinear
editing system using current DV editing software as well as
recording SD signals to an external VTR, while simultaneously
recording HDV signals with the HVR-M10U. The HVR-M10U
can also down-convert to 480p and 576p and output these
signals through its analog component video connectors.
When down-converting these signals, the aspect ratio
displayed can be converted from 16:9 to 4:3. Display modes
can be selected from Squeeze, Letterbox or Edge crop.
i.LINK3 Interface
The HVR-M10U is equipped with a 4-pin i.LINK interface.
This allows for on-cable digital transfer of audio, video, and
command signals to a connected VTR or nonlinear editing
system in the HDV, DVCAM and DV formats.
Note: i.LINK is a trademark of Sony Corporation used only to designate
that a product contains an IEEE 1394 connector. Not all products
with an i.LINK connector will necessarily communicate with each other.
For information on compatibility, operating conditions and proper connection,
please refer to the documentation supplied with any device with an i.LINK
connector. For information on devices that include an i.LINK connection, please
contact your nearest Sony office.
Compact, Unique Design
The HVR-M10U is compact, with a small footprint that enables it to be
unobtrusively added to existing work environments. The HVR-M10U
is also unique – it can be placed either horizontally or vertically.
In addition, it includes a control panel lid and a cassette compartment
lid on its front.
2-channel Independent Audio Record
Level Control with Audio Level Meter Each input level for CH1 and CH2
can be independently adjusted using two audio level controls on the
control panel and viewed with an audio level meter on the LCD monitor.
The audio level meter can be recalled quickly and easily by a Status
Check function.
Time Code Preset
The time code can be preset using any number in H/M/S/F
hours/minutes/seconds/frames) to record desired tape-position
information. The time-code mode can be selected between “REC RUN”
and “FREE RUN”. In addition to the time code, user bits can also
be set.
External Control
The HVR-M10U comes equipped with a wireless Remote Commander® unit,
which provides control of basic functions. In addition, the HVR-M10U
is equipped with a LANC terminal.
Built-in, 16:9 Widescreen LCD Monitor
The HVR-M10U includes a 3.5-inch (viewable area,
measured diagonally) color LCD monitor with a high
resolution of approx. 250,000 pixels, allowing operators
to view the input source during recording, or check the
playback picture, in a widescreen aspect ratio of 16:9.
This large screen is also helpful when setting menus or
audio recording levels, as well as for monitoring the VTR
and audio status.
Battery Operation
With the optional NP-F970 InfoLITHIUM® Rechargeable
Battery Pack attached, the HVR-M10U can continuously
record in HDV mode for up to 545 minutes, or up to
630 minutes in DVCAM/DV mode with the LCD monitor
off. Battery information, such as the current charge level
and current remaining recording time, can be displayed
on the LCD monitor at the touch of a button.
Status Check
At the touch of a button, operators can display the
menu settings, mode of operation, time code and
audio level indications superimposed over the video on
the LCD monitor, allowing for easy status or settings
checks during recording, playback and feeding.
Noiseless Design, with No Cooling Fan
The HVR-M10U requires no cooling fan, providing quiet
program-production environments.
Difference from HVRM15AU: No 24p, 4pin iLink vs 6iLink,
HAS 3.5" LCD Monitor
Difference from HVRM25AU: No BNC, No HDMI, No 24p,
Has AC Adaptor, No audio input of -2 or +4dbU level,
HAS 3.5" vs 2.7" LCD, HAS stand
Recording / Playback performance
|
Recording Format
|
1080/60i, 1080/50i, 480/60i (NTSC), 576/50i (PAL)
|
Playout/Down conversion format
|
1080/60i, 1080/50i, 480/60i (NTSC), 576/50i (PAL), 480/60p, 576/50p
|
Tape speed:
|
HDV/DV SP: Max. 18.812 mm/s with PHDVM-63DM cassette
DVCAM: Max. 28.218 mm/s with PHDVM-63DM cassette
|
Playback/Recording time
|
HDV/DV SP: Max. 63 min with PHDVM-63DM cassette
DVCAM: Max. 41 min with PHDVM-63DM cassette
|
Fast forward/Rewind time
|
Approx. up to 2 min 40 sec with PHDVM-63DM cassette
|
Input/Output Connectors/devices
|
Video input/output
|
RCA pin x 2
Video signal: 1 Vp-p, 75 ∧ unbalanced, sync negative
|
S-video input/output
|
Mini-DIN 4-pin x 2
Y: 1 Vp-p, 75 ∧ unbalanced, sync negative C: 0.286 Vp-p (NTSC), 0.3 Vp-p (PAL), 75 ∧ unbalanced
|
Component video output
|
RCA pin x 3
Y: 1 Vp-p (0.3 V, sync negative) Pr/Pb (Cr/Cb): 700 mVp-p (100% color bar), input impedance 75 Ohm
|
i.LINK Interface
|
4-pin
|
Phones
|
Stereo minijack (3.5 mm), 8 ohm loading
|
LANC
|
Stereo mini-minijack (2.5 mm)
|
Audio input
|
RCA pin x 2
Input level: max. 4 Vrms, input impedance: min. 47 k∧ unbalanced
|
Audio output
|
RCA pin x 2
Output level: 2 Vrms (full bit), output impedance: max. 1 kilo-ohm
|
LCD monitor
|
3.5-inch (viewable area, measured diagonally), approx. 250,000 pixels (1120 x 224), hybrid type
|
General
|
Weight
|
Approx. 3 lb 15 1/2 oz (1.8 kg)
|
Power requirements
|
DC 8.4 V (DC IN jack), DC 7.2 V (Battery jack input)
|
Power consumption
|
HDV: 6.5 W (playback mode with LCD monitor on)
DVCAM/DV: 5.7 W (playback mode with LCD monitor on)
|
Operating temperature
|
41 to 104 °F (5 to 40 °C)
|
Storage temperature
|
-4 to 140 °F (-20 to +60 °C)
|
Supplied accessories
|
Wireless Remote Commander unit, AC adaptor, power cord, stand, size AA batteries (2), cleaning cassette, operating instructions
|
|
|
